相关词典网站：请选择错误类型（可多选）：
其他错误（选填）： 上传我的文档
 下载
 收藏
负责组织、建立工厂生产运营体系、质保体系、成本控制体系、考核体系以及各项制度流程，并监督、保证高效正常运行。
 下载此文档
正在努力加载中...
the hierarchy of central functions within the city
下载积分：3000
内容提示：the hierarchy of central functions within the city
文档格式：PDF|
浏览次数：0|
上传日期： 15:39:34|
文档星级：
全文阅读已结束，如果下载本文需要使用
 3000 积分
下载此文档
该用户还上传了这些文档
the hierarchy of central functions within the ci
关注微信公众号From Wikipedia, the free encyclopedia
A pictorial representation of a simple linear program with two variables and six inequalities. The set of feasible solutions is depicted in yellow and forms a , a 2-dimensional . The linear cost function is represented by the red line and the arrow: The red line is a
of the cost function, and the arrow indicates the direction in which we are optimizing.
A closed feasible region of a problem with three variables is a convex . The surfaces giving a fixed value of the objective function are
(not shown). The linear programming problem is to find a point on the polyhedron that is on the plane with the highest possible value.
Linear programming (LP, also called linear optimization) is a method to achieve the best outcome (such as maximum profit or lowest cost) in a
whose requirements are represented by . Linear programming is a special case of mathematical programming ().
More formally, linear programming is a technique for the
, subject to
is a , which is a set defined as the
of finitely many , each of which is defined by a linear inequality. Its objective function is a -valued
defined on this polyhedron. A linear programming
finds a point in the polyhedron where this function has the smallest (or largest) value if such a point exists.
Linear programs are problems that can be expressed in
subject to
{\displaystyle {\begin{aligned}&{\text{maximize}}&&\mathbf {c} ^{\mathrm {T} }\mathbf {x} \\&{\text{subject to}}&&A\mathbf {x} \leq \mathbf {b} \\&{\text{and}}&&\mathbf {x} \geq \mathbf {0} \end{aligned}}}
where x represents the vector of variables (to be determined), c and b are
of (known) coefficients, A is a (known)
of coefficients, and
{\displaystyle (\cdot )^{\mathrm {T} }}
is the . The expression to be maximized or minimized is called the
(cTx in this case). The inequalities Ax ≤ b and x ≥ 0 are the constraints which specify a
over which the objective function is to be optimized. In this context, two vectors are
when they have the same dimensions. If every entry in the first is less-than or equal-to the corresponding entry in the second, then it can be said that the first vector is less-than or equal-to the second vector.
Linear programming can be applied to various fields of study. It is widely used in mathematics, and to a lesser extent in business, , and for some engineering problems. Industries that use linear programming models include transportation, energy, telecommunications, and manufacturing. It has proven useful in modeling diverse types of problems in , , , , and design.
The problem of solving a system of linear inequalities dates back at least as far as , who in 1827 published a method for solving them, and after whom the method of
In 1939 a linear programming formulation of a problem that is equivalent to the general linear programming problem was given by the
, who also proposed a method for solving it. It is a way he developed, during , to plan expenditures and returns in order to reduce costs of the army and to increase losses incurred to the enemy.[] Kantorovich's work was initially neglected in the . About the same time as Kantorovich, the Dutch-American economist
formulated classical economic problems as linear programs. Kantorovich and Koopmans later shared the 1975 . In 1941,
also formulated transportation problems as linear programs and gave a solution very similar to the later . Hitchcock had died in 1957 and the Nobel prize is not awarded posthumously.
independently developed general linear programming formulation to use for planning problems in US Air Force[]. In 1947, Dantzig also invented the
that for the first time efficiently tackled the linear programming problem in most cases[]. When Dantzig arranged a meeting with
to discuss his simplex method, Neumann immediately conjectured the theory of
by realizing that the problem he had been working in
was equivalent[]. Dantzig provided formal proof in an unpublished report "A Theorem on Linear Inequalities" on January 5, 1948. In the post-war years, many industries applied it in their daily planning.
Dantzig's original example was to find the best assignment of 70 people to 70 jobs. The computing power required to test all the permutations to select the bes the number of possible configurations exceeds the
in the . However, it takes only a moment to find the optimum solution by posing the problem as a linear program and applying the . The theory behind linear programming drastically reduces the number of possible solutions that must be checked.
The linear programming problem was first shown to be solvable in polynomial time by
in 1979[], but a larger theoretical and practical breakthrough in the field came in 1984 when
introduced a new
for solving linear-programming problems[].
Linear programming is a widely used field of optimization for several reasons. Many practical problems in
can be expressed as linear programming problems. Certain special cases of linear programming, such as network flow problems and multicommodity flow problems are considered important enough to have generated much research on specialized algorithms for their solution. A number of algorithms for other types of optimization problems work by solving LP problems as sub-problems. Historically, ideas from linear programming have inspired many of the central concepts of optimization theory, such as duality, decomposition, and the importance of convexity and its generalizations. Likewise, linear programming was heavily used in the early formation of
and is currently utilized in company management, such as planning, production, transportation, technology and other issues. Although the modern management issues are ever-changing, most companies would like to
or minimize costs with limited resources. Therefore, many issues can be characterized as linear programming problems.
Standard form is the usual and most intuitive form of describing a linear programming problem. It consists of the following three parts:
A linear function to be maximized
{\displaystyle f(x_{1},x_{2})=c_{1}x_{1}+c_{2}x_{2}}
Problem constraints of the following form
{\displaystyle {\begin{matrix}a_{11}x_{1}+a_{12}x_{2}&\leq b_{1}\\a_{21}x_{1}+a_{22}x_{2}&\leq b_{2}\\a_{31}x_{1}+a_{32}x_{2}&\leq b_{3}\\\end{matrix}}}
Non-negative variables
{\displaystyle {\begin{matrix}x_{1}\geq 0\\x_{2}\geq 0\end{matrix}}}
The problem is usually expressed in
form, and then becomes:
{\displaystyle \max\{\mathbf {c} ^{\mathrm {T} }\mathbf {x} \;|\;A\mathbf {x} \leq \mathbf {b} \land \mathbf {x} \geq 0\}}
Other forms, such as minimization problems, problems with constraints on alternative forms, as well as problems involving negative
can always be rewritten into an equivalent problem in standard form.
Suppose that a farmer has a piece of farm land, say L km2, to be planted with either wheat or barley or some combination of the two. The farmer has a limited amount of fertilizer, F kilograms, and pesticide, P kilograms. Every square kilometer of wheat requires F1 kilograms of fertilizer and P1 kilograms of pesticide, while every square kilometer of barley requires F2 kilograms of fertilizer and P2 kilograms of pesticide. Let S1 be the selling price of wheat per square kilometer, and S2 be the selling price of barley. If we denote the area of land planted with wheat and barley by x1 and x2 respectively, then profit can be maximized by choosing optimal values for x1 and x2. This problem can be expressed with the following linear programming problem in the standard form:
{\displaystyle S_{1}\cdot x_{1}+S_{2}\cdot x_{2}}
(maximize the revenue—revenue is the "objective function")
Subject to:
{\displaystyle x_{1}+x_{2}\leq L}
(limit on total area)
{\displaystyle F_{1}\cdot x_{1}+F_{2}\cdot x_{2}\leq F}
(limit on fertilizer)
{\displaystyle P_{1}\cdot x_{1}+P_{2}\cdot x_{2}\leq P}
(limit on pesticide)
{\displaystyle x_{1}\geq 0,x_{2}\geq 0}
(cannot plant a negative area).
In matrix form this becomes:
{\displaystyle {\begin{bmatrix}S_{1}&S_{2}\end{bmatrix}}{\begin{bmatrix}x_{1}\\x_{2}\end{bmatrix}}}
subject to
{\displaystyle {\begin{bmatrix}1&1\\F_{1}&F_{2}\\P_{1}&P_{2}\end{bmatrix}}{\begin{bmatrix}x_{1}\\x_{2}\end{bmatrix}}\leq {\begin{bmatrix}L\\F\\P\end{bmatrix}},\,{\begin{bmatrix}x_{1}\\x_{2}\end{bmatrix}}\geq {\begin{bmatrix}0\\0\end{bmatrix}}.}
Linear programming problems can be converted into an augmented form in order to apply the common form of the . This form introduces non-negative
to replace inequalities with equalities in the constraints. The problems can then be written in the following
{\displaystyle z}
{\displaystyle {\begin{bmatrix}1&-\mathbf {c} ^{T}&0\\0&\mathbf {A} &\mathbf {I} \end{bmatrix}}{\begin{bmatrix}z\\\mathbf {x} \\\mathbf {s} \end{bmatrix}}={\begin{bmatrix}0\\\mathbf {b} \end{bmatrix}}}
{\displaystyle \mathbf {x} \geq 0,\mathbf {s} \geq 0}
{\displaystyle \mathbf {s} }
are the newly introduced slack variables,
{\displaystyle \mathbf {x} }
are the decision variables, and
{\displaystyle z}
is the variable to be maximized.
The example above is converted into the following augmented form:
{\displaystyle S_{1}\cdot x_{1}+S_{2}\cdot x_{2}}
(objective function)
subject to:
{\displaystyle x_{1}+x_{2}+x_{3}=L}
(augmented constraint)
{\displaystyle F_{1}\cdot x_{1}+F_{2}\cdot x_{2}+x_{4}=F}
(augmented constraint)
{\displaystyle P_{1}\cdot x_{1}+P_{2}\cdot x_{2}+x_{5}=P}
(augmented constraint)
{\displaystyle x_{1},x_{2},x_{3},x_{4},x_{5}\geq 0.}
{\displaystyle x_{3},x_{4},x_{5}}
are (non-negative) slack variables, representing in this example the unused area, the amount of unused fertilizer, and the amount of unused pesticide.
In matrix form this becomes:
{\displaystyle z}
{\displaystyle {\begin{bmatrix}1&-S_{1}&-S_{2}&0&0&0\\0&1&1&1&0&0\\0&F_{1}&F_{2}&0&1&0\\0&P_{1}&P_{2}&0&0&1\\\end{bmatrix}}{\begin{bmatrix}z\\x_{1}\\x_{2}\\x_{3}\\x_{4}\\x_{5}\end{bmatrix}}={\begin{bmatrix}0\\L\\F\\P\end{bmatrix}},\,{\begin{bmatrix}x_{1}\\x_{2}\\x_{3}\\x_{4}\\x_{5}\end{bmatrix}}\geq 0.}
This section does not
any . Please help
by . Unsourced material may be challenged and . (October 2015) ()
Every linear programming problem, referred to as a primal problem, can be converted into a , which provides an upper bound to the optimal value of the primal problem. In matrix form, we can express the primal problem as:
Maximize cTx subject to Ax ≤ b, x ≥ 0;
with the corresponding symmetric dual problem,
Minimize bTy subject to ATy ≥ c, y ≥ 0.
An alternative primal formulation is:
Maximize cTx subject to Ax ≤ b;
with the corresponding asymmetric dual problem,
Minimize bTy subject to ATy = c, y ≥ 0.
There are two ideas fundamental to duality theory. One is the fact that (for the symmetric dual) the dual of a dual linear program is the original primal linear program. Additionally, every feasible solution for a linear program gives a bound on the optimal value of the objective function of its dual. The
theorem states that the objective function value of the dual at any feasible solution is always greater than or equal to the objective function value of the primal at any feasible solution. The
theorem states that if the primal has an optimal solution, x*, then the dual also has an optimal solution, y*, and cTx*=bTy*.
A linear program can also be unbounded or infeasible. Duality theory tells us that if the primal is unbounded then the dual is infeasible by the weak duality theorem. Likewise, if the dual is unbounded, then the primal must be infeasible. However, it is possible for both the dual and the primal to be infeasible. As an example, consider the linear program:
{\displaystyle 2x_{1}-x_{2}}
Subject to:
{\displaystyle x_{1}-x_{2}\leq 1}
{\displaystyle -x_{1}+x_{2}\leq -2}
{\displaystyle x_{1},x_{2}\geq 0}
Revisit the above example of the farmer who may grow wheat and barley with the set provision of some L land, F fertilizer and P pesticide. Assume now that y unit prices for each of these means of production (inputs) are set by a planning board. The planning board's job is to minimize the total cost of procuring the set amounts of inputs while providing the farmer with a floor on the unit price of each of his crops (outputs), S1 for wheat and S2 for barley. This corresponds to the following linear programming problem:
{\displaystyle L\cdot y_{L}+F\cdot y_{F}+P\cdot y_{P}}
(minimize the total cost of the means of production as the "objective function")
subject to:
{\displaystyle y_{L}+F_{1}\cdot y_{F}+P_{1}\cdot y_{P}\geq S_{1}}
(the farmer must receive no less than S1 for his wheat)
{\displaystyle y_{L}+F_{2}\cdot y_{F}+P_{2}\cdot y_{P}\geq S_{2}}
(the farmer must receive no less than S2 for his barley)
{\displaystyle y_{L},y_{F},y_{P}\geq 0}
(prices cannot be negative).
In matrix form this becomes:
{\displaystyle {\begin{bmatrix}L&F&P\end{bmatrix}}{\begin{bmatrix}y_{L}\\y_{F}\\y_{P}\end{bmatrix}}}
subject to:
{\displaystyle {\begin{bmatrix}1&F_{1}&P_{1}\\1&F_{2}&P_{2}\end{bmatrix}}{\begin{bmatrix}y_{L}\\y_{F}\\y_{P}\end{bmatrix}}\geq {\begin{bmatrix}S_{1}\\S_{2}\end{bmatrix}},\,{\begin{bmatrix}y_{L}\\y_{F}\\y_{P}\end{bmatrix}}\geq 0.}
The primal problem deals with physical quantities. With all inputs available in limited quantities, and assuming the unit prices of all outputs is known, what quantities of outputs to produce so as to maximize total revenue? The dual problem deals with economic values. With floor guarantees on all output unit prices, and assuming the available quantity of all inputs is known, what input unit pricing scheme to set so as to minimize total expenditure?
To each variable in the primal space corresponds an inequality to satisfy in the dual space, both indexed by output type. To each inequality to satisfy in the primal space corresponds a variable in the dual space, both indexed by input type.
The coefficients that bound the inequalities in the primal space are used to compute the objective in the dual space, input quantities in this example. The coefficients used to compute the objective in the primal space bound the inequalities in the dual space, output unit prices in this example.
Both the primal and the dual problems make use of the same matrix. In the primal space, this matrix expresses the consumption of physical quantities of inputs necessary to produce set quantities of outputs. In the dual space, it expresses the creation of the economic values associated with the outputs from set input unit prices.
Since each inequality can be replaced by an equality and a slack variable, this means each primal variable corresponds to a dual slack variable, and each dual variable corresponds to a primal slack variable. This relation allows us to speak about complementary slackness.
Sometimes, one may find it more intuitive to obtain the dual program without looking at the program matrix. Consider the following linear program:
{\displaystyle \sum _{i=1}^{m}{c_{i}x_{i}}+\sum _{j=1}^{n}{d_{j}t_{j}}}
subject to
{\displaystyle \sum _{i=1}^{m}{a_{ij}x_{i}}+e_{j}t_{j}\geq g_{j}}
{\displaystyle 1\leq j\leq n}
{\displaystyle f_{i}x_{i}+\sum _{j=1}^{n}{b_{ij}t_{j}}\geq h_{i}}
{\displaystyle 1\leq i\leq m}
{\displaystyle x_{i}\geq 0,\,t_{j}\geq 0}
{\displaystyle 1\leq i\leq m,1\leq j\leq n}
We have m + n conditions and all variables are non-negative. We shall define m + n dual variables: yj and si. We get:
{\displaystyle \sum _{i=1}^{m}{c_{i}x_{i}}+\sum _{j=1}^{n}{d_{j}t_{j}}}
subject to
{\displaystyle \sum _{i=1}^{m}{a_{ij}x_{i}}\cdot y_{j}+e_{j}t_{j}\cdot y_{j}\geq g_{j}\cdot y_{j}}
{\displaystyle 1\leq j\leq n}
{\displaystyle f_{i}x_{i}\cdot s_{i}+\sum _{j=1}^{n}{b_{ij}t_{j}}\cdot s_{i}\geq h_{i}\cdot s_{i}}
{\displaystyle 1\leq i\leq m}
{\displaystyle x_{i}\geq 0,\,t_{j}\geq 0}
{\displaystyle 1\leq i\leq m,1\leq j\leq n}
{\displaystyle y_{j}\geq 0,\,s_{i}\geq 0}
{\displaystyle 1\leq j\leq n,1\leq i\leq m}
Since this is a minimization problem, we would like to obtain a dual program that is a lower bound of the primal. In other words, we would like the sum of all right hand side of the constraints to be the maximal under the condition that for each primal variable the sum of its
do not exceed its coefficient in the linear function. For example, x1 appears in n + 1 constraints. If we sum its constraints' coefficients we get a1,1y1 + a1,2y2 + ... + a1,nyn + f1s1. This sum must be at most c1. As a result, we get:
{\displaystyle \sum _{j=1}^{n}{g_{j}y_{j}}+\sum _{i=1}^{m}{h_{i}s_{i}}}
subject to
{\displaystyle \sum _{j=1}^{n}{a_{ij}y_{j}}+f_{i}s_{i}\leq c_{i}}
{\displaystyle 1\leq i\leq m}
{\displaystyle e_{j}y_{j}+\sum _{i=1}^{m}{b_{ij}s_{i}}\leq d_{j}}
{\displaystyle 1\leq j\leq n}
{\displaystyle y_{j}\geq 0,\,s_{i}\geq 0}
{\displaystyle 1\leq j\leq n,1\leq i\leq m}
Note that we assume in our calculations steps that the program is in standard form. However, any linear program may be transformed to standard form and it is therefore not a limiting factor.
is a linear program of the form:
Minimize: bTy,
subject to: ATy ≥ c, y ≥ 0,
such that the matrix A and the vectors b and c are non-negative.
The dual of a covering LP is a , a linear program of the form:
Maximize: cTx,
subject to: Ax ≤ b, x ≥ 0,
such that the matrix A and the vectors b and c are non-negative.
Covering and packing LPs commonly arise as a
of a combinatorial problem and are important in the study of . For example, the LP relaxations of the , the , and the
are packing LPs. The LP relaxations of the , the , and the
are also covering LPs.
is another example of a covering LP. In this case, there is one constraint for each vertex of the graph and one variable for each
of the graph.
It is possible to obtain an optimal solution to the dual when only an optimal solution to the primal is known using the complementary slackness theorem. The theorem states:
Suppose that x = (x1, x2, ... , xn) is primal feasible and that y = (y1, y2, ... , ym) is dual feasible. Let (w1, w2, ..., wm) denote the corresponding primal slack variables, and let (z1, z2, ... , zn) denote the corresponding dual slack variables. Then x and y are optimal for their respective problems if and only if
xj zj = 0, for j = 1, 2, ... , n, and
wi yi = 0, for i = 1, 2, ... , m.
So if the i-th slack variable of the primal is not zero, then the i-th variable of the dual is equal to zero. Likewise, if the j-th slack variable of the dual is not zero, then the j-th variable of the primal is equal to zero.
This necessary condition for optimality conveys a fairly simple economic principle. In standard form (when maximizing), if there is slack in a constrained primal resource (i.e., there are "leftovers"), then additional quantities of that resource must have no value. Likewise, if there is slack in the dual (shadow) price non-negativity constraint requirement, i.e., the price is not zero, then there must be scarce supplies (no "leftovers").
Geometrically, the linear constraints define the , which is a
is a , which impli similarly, a linear function is a , which implies that every
An optimal solution need not exist, for two reasons. First, if two constraints are inconsistent, then no feasible solution exists: For instance, the constraints x ≥ 2 and x ≤ 1 cannot
in this case, we say that the LP is infeasible. Second, when the
is unbounded in the direction of the gradient of the objective function (where the gradient of the objective function is the vector of the coefficients of the objective function), then no optimal value is attained because it is always possible to do better than any finite value of the objective function.
Otherwise, if a feasible solution exists and if the constraint set is bounded, then the optimum value is always attained on the boundary of the constraint set, by the
(alternatively, by the minimum principle for ) since linear functions are both convex and concave. However, some problems have distinct optimal solutions: For example, the problem of finding a feasible solution to a system of linear inequalities is a linear programming problem in which the objective function is the zero function (that is, the constant function taking the value zero everywhere): For this feasibility problem with the zero-function for its objective-function, if there are two distinct solutions, then every convex combination of the solutions is a solution.
The vertices of the polytope are also called basic feasible solutions. The reason for this choice of name is as follows. Let d denote the number of variables. Then the fundamental theorem of linear inequalities implies (for feasible problems) that for every vertex x* of the LP feasible region, there exists a set of d (or fewer) inequality constraints from the LP such that, when we treat those d constraints as equalities, the unique solution is x*. Thereby we can study these vertices by means of looking at certain subsets of the set of all constraints (a discrete set), rather than the continuum of LP solutions. This principle underlies the
for solving linear programs.
In a linear programming problem, a series of linear constraints produces a
of possible values for those variables. In the two-variable case this region is in the shape of a convex .
The , developed by
in 1947, solves LP problems by constructing a feasible solution at a vertex of the
and then walking along a path on the edges of the polytope to vertices with non-decreasing values of the objective function until an optimum is reached for sure. In many practical problems, "" occurs: Many pivots are made with no increase in the objective function. In rare practical problems, the usual versions of the simplex algorithm may actually "cycle". To avoid cycles, researchers developed new pivoting rules.
In practice, the simplex
is quite efficient and can be guaranteed to find the global optimum if certain precautions against cycling are taken. The simplex algorithm has been proved to solve "random" problems efficiently, i.e. in a cubic number of steps, which is similar to its behavior on practical problems.
However, the simplex algorithm has poor worst-case behavior: Klee and Minty constructed a family of linear programming problems for which the simplex method takes a number of steps exponential in the problem size. In fact, for some time it was not known whether the linear programming problem was solvable in , i.e. of .
Like the simplex algorithm of Dantzig, the
is a basis-exchange algorithm that pivots between bases. However, the criss-cross algorithm need not maintain feasibility, but can pivot rather from a feasible basis to an infeasible basis. The criss-cross algorithm does not have
for linear programming. Both algorithms visit all 2D corners of a (perturbed)
in dimension D, the , in the .
In contrast to the simplex algorithm, which finds an optimal solution by traversing the edges between vertices on a polyhedral set, interior-point methods move through the interior of the feasible region.
This is the first
algorithm ever found for linear programming. To solve a problem which has n variables and can be encoded in L input bits, this algorithm uses O(n4L) pseudo-arithmetic operations on numbers with O(L) digits.
solved this long-standing complexity issue in 1979 with the introduction of the . The convergence analysis has (real-number) predecessors, notably the
developed by
by Arkadi Nemirovski and D. Yudin.
Khachiyan's algorithm was of landmark importance for establishing the polynomial-time solvability of linear programs. The algorithm was not a computational break-through, as the simplex method is more efficient for all but specially constructed families of linear programs.
However, Khachiyan's algorithm inspired new lines of research in linear programming. In 1984,
proposed a
for linear programming. Karmarkar's algorithm improved on Khachiyan's worst-case polynomial bound (giving
{\displaystyle O(n^{3.5}L)}
). Karmarkar claimed that his algorithm was much faster in practical LP than the simplex method, a claim that created great interest in interior-point methods. Since Karmarkar's discovery, many interior-point methods have been proposed and analyzed.
Affine scaling is one of the oldest interior point methods to be developed. It was developed in the Soviet Union in the mid-1960s, but didn't receive much attention until the discovery of Karmarkar's algorithm, after which affine scaling was
and presented as a simplified version of Karmarkar's. Affine scaling amounts to doing
steps within the feasible region, while rescaling the problem to make sure the steps move toward the optimum faster.
For both theoretical and practical purposes,
methods have been the most popular interior point methods since the 1990s.
The current opinion is that the efficiencies of good implementations of simplex-based methods and interior point methods are similar for routine applications of linear programming. However, for specific types of LP problems, it may be that one type of solver is better than another (sometimes much better), and that the structure of the solutions generated by interior point methods versus simplex-based methods are significantly different with the support set of active variables being typically smaller for the later one.
Covering and packing LPs can be solved
in nearly-linear time. That is, if matrix A is of dimension n×m and has N non-zero entries, then there exist algorithms that run in time O(N·(log N)O(1)/εO(1)) and produce O(1±ε) approximate solutions to given covering and packing LPs. The best known sequential algorithm of this kind runs in time O(N + (log N)·(n+m)/ε2), and the best known parallel algorithm of this kind runs in O((log N)2/ε3) iterations, each requiring only a matrix-vector multiplication which is highly parallelizable.
Unsolved problem in computer science:
Does linear programming admit a strongly polynomial-time algorithm?
There are several open problems in the theory of linear programming, the solution of which would represent fundamental breakthroughs in mathematics and potentially major advances in our ability to solve large-scale linear programs.
Does LP admit a -time algorithm?
Does LP admit a strongly polynomial-time algorithm to find a strictly complementary solution?
Does LP admit a polynomial-time algorithm in the real number (unit cost) model of computation?
This closely related set of problems has been cited by
as among the
of the 21st century. In Smale's words, the third version of the problem "is the main unsolved problem of linear programming theory." While algorithms exist to solve linear programming in weakly polynomial time, such as the
and , no algorithms have yet been found that allow strongly polynomial-time performance in the number of constraints and the number of variables. The development of such algorithms would be of great theoretical interest, and perhaps allow practical gains in solving large LPs as well.
Although the
was recently disproved for higher dimensions, it still leaves the following questions open.
Are there pivot rules which lead to polynomial-time simplex variants?
Do all polytopal graphs have polynomially bounded diameter?
These questions relate to the performance analysis and development of simplex-like methods. The immense efficiency of the simplex algorithm in practice despite its exponential-time theoretical performance hints that there may be variations of simplex that run in polynomial or even strongly polynomial time. It would be of great practical and theoretical significance to know whether any such variants exist, particularly as an approach to deciding if LP can be solved in strongly polynomial time.
The simplex algorithm and its variants fall in the family of edge-following algorithms, so named because they solve linear programming problems by moving from vertex to vertex along edges of a polytope. This means that their theoretical performance is limited by the maximum number of edges between any two vertices on the LP polytope. As a result, we are interested in knowing the maximum
of polytopal . It has been proved that all polytopes have subexponential diameter. The recent disproof of the Hirsch conjecture is the first step to prove whether any polytope has superpolynomial diameter. If any such polytopes exist, then no edge-following variant can run in polynomial time. Questions about polytope diameter are of independent mathematical interest.
Simplex pivot methods preserve primal (or dual) feasibility. On the other hand, criss-cross pivot methods do not preserve (primal or dual) feasibility—they may visit primal feasible, dual feasible or primal-and-dual infeasible bases in any order. Pivot methods of this type have been studied since the 1970s. Essentially, these methods attempt to find the shortest pivot path on the
under the linear programming problem. In contrast to polytopal graphs, graphs of arrangement polytopes are known to have small diameter, allowing the possibility of strongly polynomial-time criss-cross pivot algorithm without resolving questions about the diameter of general polytopes.
If all of the unknown variables are required to be integers, then the problem is called an
(IP) or integer linear programming (ILP) problem. In contrast to linear programming, which can be solved efficiently in the worst case, integer programming problems are in many practical situations (those with bounded variables) . 0–1 integer programming or binary integer programming (BIP) is the special case of integer programming where variables are required to be 0 or 1 (rather than arbitrary integers). This problem is also classified as NP-hard, and in fact the decision version was one of .
If only some of the unknown variables are required to be integers, then the problem is called a mixed integer programming (MIP) problem. These are generally also NP-hard because they are even more general than ILP programs.
There are however some important subclasses of IP and MIP problems that are efficiently solvable, most notably problems where the constraint matrix is
and the right-hand sides of the constraints are integers or – more general – where the system has the
(TDI) property.
Advanced algorithms for solving integer linear programs include:
if the problem has some extra structure, it may be possible to apply .
Such integer-programming algorithms are discussed by Padberg and in Beasley.
A linear program in real variables is said to be integral if it has at least one optimal solution which is integral. Likewise, a polyhedron
{\displaystyle P=\{x\mid Ax\geq 0\}}
is said to be integral if for all bounded feasible objective functions c, the linear program
{\displaystyle \{\max cx\mid x\in P\}}
has an optimum
{\displaystyle x^{*}}
with integer coordinates. As observed by Edmonds and Giles in 1977, one can equivalently say that the polyhedron
{\displaystyle P}
is integral if for every bounded feasible integral objective function c, the optimal value of the linear program
{\displaystyle \{\max cx\mid x\in P\}}
is an integer.
Integral linear programs are of central importance in the polyhedral aspect of
since they provide an alternate characterization of a problem. Specifically, for any problem, the convex hull of the solutions is an if this polyhedron has a nice/compact description, then we can efficiently find the optimal feasible solution under any linear objective. Conversely, if we can prove that a
is integral, then it is the desired description of the convex hull of feasible (integral) solutions.
Note that terminology is not consistent throughout the literature, so one should be careful to distinguish the following two concepts,
in an integer linear program, described in the previous section, variables are forcibly constrained to be integers, and this problem is NP-hard in general,
in an integral linear program, described in this section, variables are not constrained to be integers but rather one has proven somehow that the continuous problem always has an integral optimal value (assuming c is integral), and this optimal value may be found efficiently since all polynomial-size linear programs can be solved in polynomial time.
One common way of proving that a polyhedron is integral is to show that it is . There are other general methods including the
and . Other specific well-known integral LPs include the matching polytope, lattice polyhedra,
flow polyhedra, and the intersection of 2 generalized polymatroids/g-polymatroids – e.g. see Schrijver 2003.
A bounded integral polyhedron is sometimes called a , particularly in two dimensions.
Brief info
An open-source modeling language for large-scale linear, mixed integer and nonlinear optimization
Brief info
an incremental constraint solving toolkit that efficiently solves systems of linear equalities and inequalities
an LP solver from COIN-OR
GNU Linear Programming Kit, an LP/MILP solver with a native C
and numerous (15) third-party wrappers for other languages. Specialist support for . Bundles the -like
modelling language and translator.
a library for incrementally solving systems of linear equations with various goal functions
QSopt-Exact
a C-based solver library using .
a programming language and software environment for statistical computing and graphics
(Mixed Integer Optimizer, an
solver which uses branch and bound algorithm) has publicly available source code but is not open source.
Brief info
A popular modeling language for large-scale linear, mixed integer and nonlinear optimisation with a free student limited version available (500 variables and 500 constraints).
API to MATLAB and Python. Solve example
through MATLAB, Python, or a web-interface.
Popular solver with an API for several programming languages, and also has a modelling language and works with AIMMS, AMPL, , MPL, OpenOpt, OPL Development Studio, and . Free for academic use.
Solver Function
A nonlinear solver adjusted to spreadsheets in which function evaluations are based on the recalculating cells. Basic version available as a standard add-on for Excel.
Solver with parallel algorithms for large-scale linear programs, quadratic programs and mixed-integer programs. Free for academic use.
Collections of math and statistical algorithms available in C/C++, Fortran, Java and C#/.NET. Optimization routines in the IMSL Libraries include unconstrained, linearly and nonlinearly constrained minimizations, and linear programming algorithms.
Solver with an API for large scale optimization of linear, integer, quadratic, conic and general nonlinear programs with stochastic programming extensions. It offers a global optimization procedure for finding guaranteed globally optimal solution to general nonlinear programs with continuous and discrete variables. It also has a statistical sampling API to integrate Monte-Carlo simulations into an optimization framework. It has an algebraic modeling language () and allows modeling within a spreadsheet ().
A general-purpose programming-language for symbolic and numerical computing.
A general-purpose and matrix-oriented programming-language for numerical computing. Linear programming in MATLAB requires the
in addition to the base MATLAB available routines include INTLINPROG and LINPROG
A WYSIWYG math editor. It has functions for solving both linear and nonlinear optimization problems.
A general-purpose programming-language for mathematics, including symbolic and numerical capabilities.
A solver for large scale optimization with API for several languages (C++,java,.net, Matlab and python).
A collection of mathematical and statistical routines developed by the
for multiple programming languages (C, C++, Fortran, Visual Basic, Java and C#) and packages (MATLAB, Excel, R, LabVIEW). The Optimization chapter of the NAG Library includes routines for linear programming problems with both sparse and non-sparse linear constraint matrices, together with routines for the optimization of quadratic, nonlinear, sums of squares of linear or nonlinear functions with nonlinear, bounded or no constraints. The NAG Library has routines for both local and global optimization, and for continuous or integer problems.
A general-purpose
statistical library containing a simplex solver.
A C-based floating-point solver offered as a callable library and command-line and UI executables. Binaries available for Windows, Mac OS and several UNIX flavors. Free for research purposes. Compatible with MPS and LP industry-standard formats.
A Java-based modeling language for optimization with a free version available.
A suite of solvers for Linear, Integer, Nonlinear, Derivative-Free, Network, Combinatorial and Constraint O and a variety of vertical solutions aimed at specific problems/markets, all of which are fully integrated with the .
A general-purpose constraint integer programming solver with an emphasis on MIP. Compatible with
modelling language. Free for academic use and available in source code.
Solver for large-scale linear programs, quadratic programs, general nonlinear and mixed-integer programs. Has API for several programming languages, also has a modelling language Mosel and works with AMPL, . Free for academic use.
language for simulation of .
, a superset of linear programming
, used to solve LP problems
Gerard Sierksma (2001). Linear and Integer Programming: Theory and Practice, Second Edition. CRC Press. p. 1.  .
Alexander Schrijver (1998). Theory of Linear and Integer Programming. John Wiley & Sons. pp. 221–222.  .
. Operations Research Letter. April 1982. :.
. Operations Research Letter. 1 (2): 43–48. April 1982. :.
, p. 112)
: Roos, C. (1990). "An exponential example for Terlaky's pivoting rule for the criss-cross simplex method". Mathematical Programming. Series A. 46 (1): 79–84. :.  .
(1 June 1987). "Karmarkar's algorithm and its place in applied mathematics". . New York: Springer. 9 (2): 4–10. :.  .  .
, pp. 333–347
Illés, T Terlaky, Tamás (2002). . European Journal of Operational Research. 140 (2): 170. :.
Christos K Neal E. Young (2013). "A Nearly Linear-Time PTAS for Explicit Fractional Packing and Covering Linear Programs". Algorithmica. 70: 648–674. : . :.
Zeyuan Allen-Z Lorenzo Orecchia (2015). Using Optimization to Break the Epsilon Barrier: A Faster and Simpler Width-Independent Algorithm for Solving Positive Linear Programs in Parallel. ACM-SIAM Symposium on Discrete Algorithms. : .
QSopt-Exact home page
. lehigh.edu.
. centerspace.net.[]
QSopt home page
OptimJ used in an optimization model for mixed-model assembly lines, University of Münster
OptimJ used in an Approximate Subgame-Perfect Equilibrium Computation Technique for Repeated Games
Kantorovich, L. V. (1940). "Об одном эффективном методе решения некоторых классов экстремальных проблем" [A new method of solving some classes of extremal problems]. . 28: 211–214.
F. L. Hitchcock: The distribution of a product from several sources to numerous localities, Journal of Mathematics and Physics, 20, –230.
G.B Dantzig: Maximization of a linear function of variables subject to linear inequalities, 1947. Published pp. 339–347 in T.C. Koopmans (ed.):Activity Analysis of Production and Allocation, New York-London 1951 (Wiley & Chapman-Hall)
J. E. Beasley, editor. Advances in Linear and Integer Programming. Oxford Science, 1996. (Collection of surveys)
Bland, Robert G. (1977). "New Finite Pivoting Rules for the Simplex Method". Mathematics of Operations Research. 2 (2): 103–107. :.  .
Karl-Heinz Borgwardt, The Simplex Algorithm: A Probabilistic Analysis, Algorithms and Combinatorics, Volume 1, Springer-Verlag, 1987. (Average behavior on random problems)
Richard W. Cottle, ed. The Basic George B. Dantzig. Stanford Business Books, Stanford University Press, Stanford, California, 2003. (Selected papers by )
George B. Dantzig and Mukund N. Thapa. 1997. Linear programming 1: Introduction. Springer-Verlag.
George B. Dantzig and Mukund N. Thapa. 2003. Linear Programming 2: Theory and Extensions. Springer-Verlag. (Comprehensive, covering e.g.
and interior-point algorithms, large-scale problems,
and , and introducing .)
Edmonds, J Giles, Rick (1977). "A Min-Max Relation for Submodular Functions on Graphs". Studies in Integer Programming. Annals of Discrete Mathematics. 1. pp. 185–204. :.  .
Fukuda, K Terlaky, Tamás (1997). Thomas M. Liebling and Dominique de Werra, eds. "Criss-cross methods: A fresh view on pivot algorithms". Mathematical Programming: Series B. Amsterdam: North-Holland Publishing Co. 79 (1—3): 369–395. :.  .
Gondzio, J Terlaky, Tamás (1996). "3 A computational view of interior point methods". In J. E. Beasley. . Oxford Lecture Series in Mathematics and its Applications. 4. New York: Oxford University Press. pp. 103–144.  .
(1983). Linear programming. New York: John Wiley & Sons, Inc. pp. xix+482.  .  . (comprehensive reference to classical approaches).
Evar D. Nering and , 1993, Linear Programs and Related Problems, Academic Press. (elementary)
M. Padberg, Linear Optimization and Extensions, Second Edition, Springer-Verlag, 1999. (carefully written account of primal and dual simplex algorithms and projective algorithms, with an introduction to integer linear programming – featuring the
and Kenneth Steiglitz, Combinatorial Optimization: Algorithms and Complexity, Corrected republication with a new preface, Dover. (computer science)
Michael J. Todd (February 2002). "The many facets of linear programming". Mathematical Programming. 91 (3): 417–436. :. (Invited survey, from the International Symposium on Mathematical Programming.)
Vanderbei, Robert J. (2001). Linear Programming: Foundations and Extensions. Springer Verlag.
(2001). Approximation Algorithms. Springer-Verlag.  . (Computer science)
A reader may consider beginning with Nering and Tucker, with the first volume of Dantzig and Thapa, or with Williams.
Dmitris Alevras and Manfred W. Padberg, Linear Optimization and Extensions: Problems and Solutions, Universitext, Springer-Verlag, 2001. (Problems from Padberg with solutions.)
Mark de Berg, Marc van Kreveld, , and Otfried Schwarzkopf (2000). Computational Geometry (2nd revised ed.). .  . Chapter 4: Linear Programming: pp. 63–94. Describes a randomized half-plane intersection algorithm for linear programming.
(1979). . W.H. Freeman.  . A6: MP1: INTEGER PROGRAMMING, pg.245. (computer science, complexity theory)
Bernd G?rtner,
(2006). Understanding and Using Linear Programming, Berlin: Springer.   (elementary introduction for mathematicians and computer scientists)
Cornelis Roos, Tamás Terlaky, Jean-Philippe Vial, Interior Point Methods for Linear Optimization, Second Edition, Springer-Verlag, 2006. (Graduate level)
Alexander Schrijver (2003). Combinatorial optimization: polyhedra and efficiency. Springer.
Alexander Schrijver, Theory of Linear and Integer Programming. John Wiley & sons, 1998,   (mathematical)
H. P. Williams, Model Building in Mathematical Programming, Third revised Edition, 1990. (Modeling)
Stephen J. Wright, 1997, Primal-Dual Interior-Point Methods, SIAM. (Graduate level)
, 1997, Interior Point Algorithms: Theory and Analysis, Wiley. (Advanced graduate-level)
, Chapters 1–3 and 6–7 in Lectures on Polytopes, Springer-Verlag, New York, 1994. (Geometry)
: Hidden categories: